Contact us about the MetalJet
What some of our customers say
Because we’re doing imaging where we scan a sample through the focused beam spot, any fluctuation in the intensity of the beam will be visible as an artifact in the image. So we’re very sensitive to this, and our imaging has proved to be just brilliant. It’s clearly the best quality XRF imaging with any source.
Whereas a typical CT scan only lasts three to five minutes, some of these devices we end up testing for weeks. So in that case, you need a continuously running source that’s able to manage that imaging demand. No other sources really last that long. That’s a pretty clear benefit for us.
Dr. Isaac Pinar
By introducing home-lab HAXPES [with the Excillum MetalJet D2+ at the core], continuous measurements for 24 hours a day, 365 days a year became possible. Previously, we were always limited by the available beam time and suffered from long waiting times. But with the HAXPES-Lab we could measure many samples with much faster turnaround from sample preparation, measurement and analysis to refined experiments. This allowed us to significantly accelerate our research and the result was a remarkable improvement in scientific output.”
Professor Atsushi Ogura
…with the old source you had to collect one full data set overnight… Now, with the MetalJet, it took less than an hour even for an extremely small crystal.
Na Yu, Senior XRD Engineer
Our own instrument allows us to do in-house dispersive X-ray emission from 2.3 keV, which is lower than what we’ve ever measured at a synchrotron. It gives us a much larger accessible energy range and, of course, we have access to it 365 days a year, as opposed to a few weeks a year. So, it really changes how much exploratory research you can do, how much you can test ideas, and so on.
Professor Dr. Serena DeBeer
The higher X-ray flux enables new types of experiments that were not feasible to do in a laboratory before and we can even do measurements in the time range of seconds and thus be able to repeat it many times to get better statistics.”
Professor Jan Skov Pedersen
The MetalJet technology explained
Contact us about our X-ray tubes
Our customers and partners
Our state-of-the-art X-ray sources are installed and in operation across the world. Today, 100+ Excillum X-ray sources are proven in various applications and X-ray techniques, achieving unparalleled brightness and resolution for the home lab.
We work with a large number of partners to integrate our products in complete systems, to the benefit of customers all over the world.